OpenCV 2.4.9 JAVA/CPP/Python Installation in Ubuntu 14.04

OpenCV2.4.9 installation in ubuntu is not straight forward , sometimes due to dependencies , some people won't be able to end with successful installation.In this guide, i will show you how to install OpenCV with a lot of the features it provides. Here are some of the things that are going to be enabled when you are finished following through with this installation tutorial:

1.) Qt version of the HighGUI module (Better 2D window interface with zoom, image saving capabilities, etc)
2.) OpenGL support
3.) C++ interface and examples
4.) C interface and examples
5.) Python interface and examples
6.) Java interface and examples

OK, so the first step is to make sure that everything in the system is updated and upgraded. Open the terminal and write this:

sudo apt-get update
sudo apt-get upgrade

Now, you need to install many dependencies, such as support for reading and writing image files, drawing on the screen, some needed tools, other libraries, etc… This step is very easy, you only need to write the following command in the Terminal:

sudo apt-get install build-essential libgtk2.0-dev libjpeg-dev libtiff4-dev libjasper-dev libopenexr-dev cmake python-dev python-numpy python-tk libtbb-dev libeigen3-dev yasm libfaac-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev libvorbis-dev libxvidcore-dev libx264-dev libqt4-dev libqt4-opengl-dev sphinx-common texlive-latex-extra libv4l-dev libdc1394-22-dev libavcodec-dev libavformat-dev libswscale-dev default-jdk ant libvtk5-qt4-dev

Time to get the OpenCV 2.4.9 source code:

cd ~
cd opencv-2.4.9

Now we have to generate the Makefile by using cmake. In here we can define which parts of OpenCV we want to compile. Since we want to use the viz module, Python, Java, TBB, OpenGL, Qt, work with videos, etc, here is where we need to set that. Just execute the following line at the terminal to create the appropriate Makefile. Note that there are two dots at the end of the line, it is an argument for the cmake program and it means the parent directory (because we are inside the build directory, and we want to refer to the OpenCV directory, which is its parent).

mkdir build
cd build

Check that the above command produces no error and that in particular it reports FFMPEG as YES. If this is not the case you will not be able to read or write videos. Check that Java, Python, TBB, OpenGL, V4L, OpenGL and Qt are all detected correctly.

Make sure you scroll up and check that the modules that are going to be built are these:
core flann imgproc highgui features2d calib3d ml video legacy objdetect photo gpu ocl nonfree contrib java python stitching superres ts videostab viz.

If anything is wrong, go back, correct the errors by maybe installing extra packages and then run cmake again.

Now, you are ready to compile and install OpenCV 2.4.9:

sudo make install

Now you have to configure OpenCV. First, open the opencv.conf file with the following code:

sudo gedit /etc/

Add the following line at the end of the file(it may be an empty file, that is ok) and then save it:


Run the following code to configure the library:

sudo ldconfig

Now you have to open another file:

sudo gedit /etc/bash.bashrc

Add these two lines at the end of the file and save it:


Finally, close the console and open a new one, restart the computer or logout and then login again. OpenCV will not work correctly until you do this.

Now you have OpenCV 2.4.9 installed in your computer with 3D visualization, Python, Java, OpenGL, video, and Qt support.

Check out the cool Qt interface which provides image viewing capabilities with zoom, as well as the ability to save the current image with just one click.

If you zoom in enough, you can see 
the RGB (or intensity) values for each pixel.

Now let’s build some samples included in OpenCV:

cd ~/opencv-2.4.9/samples/c
chmod +x

These examples use the old C interface:

./facedetect --cascade="/usr/local/share/OpenCV/haarcascades/haarcascade_frontalface_alt.xml" --scale=1.5 lena.jpg

The following examples use the new C++ interface:

~/opencv-2.4.9/build/bin/cpp-example-grabcut ~/opencv-2.4.9/samples/cpp/lena.jpg

Now let’s run some Python code:

python ~/opencv-2.4.9/samples/python2/

Now you can build a Java sample using ant for example. (Make sure that you change/home/anish/ with your actual home directory):

cd ~/opencv-2.4.9/samples/java/ant
ant -DocvJarDir=/home/samontab/opencv-2.4.9/build/bin -DocvLibDir=/home/samontab/opencv-2.4.9/build/lib

Now let’s read a video and use OpenGL with Qt through this great sample that detects the features from the video, then estimates the 3D location of the structure using POSIT, and finally uses OpenGL to draw in 3D (great sample Javier):

cd ~/opencv-2.4.9/samples/cpp/Qt_sample
mkdir build
cd build
cmake ..

Hope Everything installed correctly and work on your system . If any error occurred , post the comment.


Popular posts from this blog

Getting started with Deep Learning Caffe Framework - Fastest way(Installation +Web Demo)

Build Knowledge Graph from unstructured corpus using Machine Learning

Sudoku using dancing link - Java implementation